Users Guide

350 Faxing
Secure Receive You can specify whether to require a four-digit password to print
the stored incoming faxes, and to set or change the password.
Received Fax
Forward
You can set your printer to forward incoming faxes to another fax
number, to e-mail addresses, or to a server. When a fax arrives at
your printer, it is stored in the memory. Then, the printer dials the
fax number you have specified in
Forwarding Number or
forwards the fax to e-mail addresses or a server address you have
specified in the Dell Printer Configuration Web Tool.
To forward to a fax number, you need to register a fax number on
Forwarding Number. To forward to e-mail addresses, you need
to register information on the e-mail server and the forwarding e-
mail addresses. To forward to a server address, you need to register
information on the destination server. For details on setting the e-
mail server, see "E-Mail Server" and on forwarding number, e-mail
address, and server address, see "Fax Settings."
Ta p
Off not to forward incoming faxes.
Ta p
Forward to forward incoming faxes without printing. If an
error occurs during forwarding a received fax, the printer prints the
fax.
Ta p
Print and Forward to print and forward incoming
faxes.
Ta p
Forward to Email to forward incoming faxes to e-mail.
NOTE: Depending on the e-mail server settings, the printer
may not get an error which occurs during the transfer.
Ta p
Print and Forward to E-mail to print and
forward incoming faxes to e-mail.
Ta p Forward to Server to forward incoming faxes to
server.
Ta p
Print and Forward to Server to print and
forward incoming faxes to server.
2 Sided Print You can set whether to make duplex print when you print faxes.
Ta p
Off to print faxes on one side of a sheet of paper.
Ta p
On to print faxes on both sides of a sheet of paper.
NOTE: Duplex print may not be done depending on the size of
the received faxes or settings of the trays, etc.
Remote Receive You can receive a fax by pressing the remote receive code on the
external telephone after picking up the handset of the telephone.
When you set
Remote receive to On , specify a two digit
remote receive code in
Remote Receive Tone .
Option Description