Users Guide

Installing Printer Drivers on Windows
®
Computers 93
4 Select the printer you want to install from the printer list, and then click Next . If the target printer is not displayed
on the list, click the (Refresh) button to refresh the list or click
add printer manually to add a printer to the list
manually. You may specify the IP address and port name at this point.
If you have installed this printer on the server computer, select the
I am setting up this printer on a server check
box.
NOTE: When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP
address.
NOTE: If Windows Security Alert is displayed in this step, select Unblock or Allow access, and then continue the
procedure.
5 Specify the printer settings, and then click Next .
a Enter the printer name.
b If you want to set the printer as the default printer, select the Set this printer as default check box.
c If you want to install the PostScript 3 Compatible printer driver, select the PS Driver check box.
If you want to install the Fax Driver, select the
Fax Driver check box.
d If you want other users on the network to access the printer, select Share this printer with other computers on
the network
, and then enter a share name that users can identify.
6 Select the software and documentation you want to install, and then click Install . If you want to change the
installation destination, click
Change Destination Folder and specify a new location.
7 Click Finish to exit the wizard when the Ready to Print! screen appears.
If you want to verify installation, click
Print Test Page before clicking Finish .
For installing XML Paper Specification (XPS) printer driver
NOTE: XML Paper Specification (XPS) driver is supported on Windows Vista
®
or later.
Windows Vista
®
or Windows Vista
®
64-bit Edition
1
Extract the following zip file to your desired location.
D:\Drivers\XPS\Win_7Vista\XPS-V3_H815dw_S2815dn.zip (where D is the drive letter of the
optical drive)
2 Click Start  Control Panel  Hardware and Sound  Printers .
3 Click Add a printer .
4 Click Add a network , wireless or Bluetooth printer .
5 Select printer and click Next , or click The printer that I want isn't listed .
6 Select Add a printer using a TCP/IP address or host name , and then click Next .
7 Select TCP/IP Device from Device type , and enter the IP address for Hostname or IP address , and then click
Next .
If the
User Account Control dialog box appears, click Continue .
NOTE: If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the
desired action.
8 Click Have Disk to display the Install From Disk dialog box.
9 Click Browse , and then select the inf file in the folder extracted in step 1.
10 Click OK .
11 Select your printer name and click Next .