Operation Manual

150 Dell™ Printer Configuration Web Tool
Clean Developer
Purpose:
To stir the developer in the drum cartridge.
Va lu e s:
Clean Transfer Unit
Purpose:
To clean the transfer unit.
Va lu e s:
Reset Defaults
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu
parameters are reset to their default values.
Va lu e s:
Initialize PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Storage
NOTE: Storage feature is available only when RAM Disk is enabled.
Purpose:
To clear all files stored in the RAM disk.
Clean Developer Start Stirs the developer in the drum cartridge.
Toner Refresh Start Expels the toner in the drum cartridge, and supplies the fresh toner from the
toner cartridge.
Clean Transfer Unit Start Cleans the transfer unit.
Reset Defaults Reset Defaults User Fax Section and
restart printer.
Click Start to reset the fax number entries in the Address
Book.
Reset Defaults User Scan Section
and restart printer.
Click Start to reset the e-mail and server address entries
in the Address Book.
Reset Defaults User Account
Section and restart printer.*
1
Click Start to reset the user account entries.
Reset Defaults User App Section
and restart printer*
1
Click Start to reset the user application entries.
Reset Defaults System Section and
restart printer.
Click Start to reset the system parameters.
Power On Wizard Power On Wizard Click Start to perform the initial setup for the printer.
*1
This item is available on the Dell Cloud Multifunction Printer | H815dw only.