Operation Manual

152 Dell™ Printer Configuration Web Tool
Web Link Customization
Purpose:
To specify a link used for ordering consumables, which can be accessed from Order Supplies at: in the left frame.
Va lu e s:
Print Server Settings
Use the Print Server Settings menu to set the type of printer interface and the necessary conditions for
communication.
The following tabbed pages are displayed in the top of the right frame.
Print Server Reports
The Print Server Reports tab includes the Print Server Setup Page and the E-Mail Server Setup Page.
Print Server Setup Page
Displays the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) and printing ports.
E-Mail Server Setup Page
Displays the current settings of the e-mail server.
Print Server Settings
The Print Server Settings tab includes the Basic Information, Port Settings, TCP/IP, SMB, E-Mail Server, Bonjour
(mDNS), SNMP, Scan to Network Folder, SNTP, AirPrint, Mopria, Google Cloud Print, Dell Document Hub
*1
,
Proxy Server, Wi-Fi
*1
, Wi-Fi Direct
*1
, and Reset Print Server pages.
*1
This item is available only on the Dell Cloud Multifunction Printer | H815dw.
Basic Information
Purpose:
To configure basic information of the printer.
Va lu e s:
Select Reorder URL Sets a URL to be linked to Order Supplies at:
Regular Displays the regular URL (http://accessories.us.dell.com/sna) that can be linked to Order Supplies
at:.
Premier Displays the premier URL (http://premier.dell.com) that can be linked to Order Supplies at:.
System Settings Printer Name Sets the name of the printer.
Location Sets the location of the printer.
Contact Person Sets the contact name, number, and other information of the printer
administrator and service center.
Administrator E-Mail
Address
Sets the contact address of the printer administrator and service center.
Asset Tag Number Enters the asset tag number for the printer.
Dell Printer
Configuration Web Tool
Settings
Auto Refresh Automatically refreshes the contents of the status display pages.
Auto Refresh Interval Sets the time interval for refreshing the contents of the status display pages
automatically from 15 to 600 seconds.