Manualshelf

Operation Manual

ManualsBrandsDell ManualsPrinterH815dw
151152153154155156157158159160
156
Dell™ Printer Configuration Web Tool
SMB
Purpose:
To specify the setting of the Server Message Block (SMB) protocol.
Va lu e s:
E-Mail Server
Purpose:
To configure detailed settings of E-Mail Server, E-Mail Alert and E-Mail Report. This page can also be displayed by
clicking E-Mail Server Settings Overview in the left frame.
Va lu e s:
HTTP Port Number Sets the port number to 80 or from 8000 to 9999.
Simultaneous
Connections
Displays the maximum number of simultaneous connections.
CSRF Protection Select the check box to enable the CSRF Protection.
Connection Time-
Out
Sets the connection time-out period from 1 to 255 seconds.
Telnet Password Sets the password for Telnet.
Re-enter Password Confirms the set password.
Connection Time-
Out
Sets the connection time-out period from 1 to 1,000 seconds.
Update
Address Book
Connection Time-
Out
Sets the connection time-out period from 1 to 65,535 seconds.
Host Name Sets the host name of the server computer.
Workgroup Sets the workgroup.
Maximum Sessions Sets the maximum number of sessions.
Unicode Support Sets whether to notify the host name and workgroup name in Unicode characters during
SMB transmission.
Auto Master Mode Sets whether to enable the Auto Master Mode.
Encrypt Password Sets whether to encrypt the password.
Job Time-Out Sets the job time-out period between 60 and 3,600 seconds.
Connection Time-Out Sets the connection time-out period between 60 and 3,600 seconds.
E-Mail Server Settings Primary SMTP Gateway Sets the primary SMTP gateway.
SMTP Port Number Sets the SMTP port number. This must be between 1 and 65535.
E-Mail Send
Authentication
Sets the authentication method for outgoing e-mail.
SMTP Login User Sets the SMTP login user. Up to 63 alphanumeric characters, periods,
hyphens, underscores, and at symbols (@) can be used. If specifying more
than one address, separate them using commas.
SMTP Login Password Sets the SMTP account password using up to 31 alphanumeric characters.
Re-enter SMTP Login
Password
Confirms the set SMTP account password.