Operation Manual

160 Dell™ Printer Configuration Web Tool
SNTP
Purpose:
To configure the SNTP server settings in order to perform time synchronization through SNTP.
Va lu e s:
AirPrint
Purpose:
To configure the detailed setting of AirPrint.
Va lu e s:
Mopria
Purpose:
To enable the printer for Mopria Print Service.
Va lu e s:
NOTE: When both Bonjour(mDNS) and IPP are enabled, the Enable button is disabled.
SNTP IP Address / Host Name Sets the IP address or the host name of the SNTP server.
Connection Time-Out Sets the connection time-out period from 1 to 120 seconds.
Time Synchronization
Interval
Sets the interval for performing time synchronization using SNTP.
Last Connection Time Displays the last date and time when your printer was connected to the
SNTP server.
Connection Status Displays the status of the connections between the SNTP server and your
printer.
AirPrint Enable AirPrint Select the check box to enable the printer for AirPrint.
Bonjour Name Enter the name that is to be displayed as an AirPrint printer.
Location Enter the location of the printer.
Geo-Location Enter the physical location of the printer.
IPP Authentication Basic Authentication Select the check box to enable the basic authentication scheme.
User Name Enter the user name.
Password Enter the user password.
Re-enter Password Re-enter the user password for confirmation.
SSL/TLS SSL/TLS Click Settings to display the SSL/TLS page.
Supply Levels Toner Cartridge Displays the toner level.
Mopria Enable Click to enable the printer for Mopria.