Operation Manual

214 Understanding the Printer Menus
Power On Wizard
Purpose:
To perform initial setup for the printer.
Max E-mail Size
Purpose:
To specify the maximum size of e-mail that can be sent.
Va lu e s:
Timers
Purpose:
To configure timer settings.
Auto Reset
Purpose:
To automatically reset the settings for Copy, Scan, Fax, E-mail, or Print to the default settings and return to the
standby mode after you do not specify any settings for the specified time.
Va lu e s:
Fault Time-out
Purpose:
To specify the amount of time the printer waits before canceling a job that stops abnormally. The print job is canceled if the time-
out time is exceeded.
Va lu e s:
Output Settings
Purpose:
To configure settings concerning output from the printer.
4096 KB
*
Sets the maximum size of e-mail that can be sent, in increments of 1 KB.
Available Range:
50-16384 KB
45sec
*
1min
2min
3min
4min
Off Disables the fault time-out.
On
*
60 seconds
*
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Available Range: 3-300 seconds