Operation Manual

Understanding the Printer Menus 229
Va lu e s:
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is canceled if the time-out
time is exceeded.
Va lu e s:
Default Settings
Use Default Settings to modify the Copy, Scan, or Fax menu defaults.
Copy Defaults
Purpose:
To mod ify the Copy menu defaults.
Copy Defaults allows you to configure the following items in addition to the items under the Copy menu.
Auto Exposure Level
Purpose:
To specify the default background suppression level.
Va lu e s:
Fax Defaults
Purpose:
To mod ify the Fax menu defaults. See "Fax" for more details.
Scan Defaults
Purpose:
To mod ify the Scan menu defaults.
Scan Defaults allows you to configure the following items in addition to the items under the Scan menu.
Auto Used when auto-detecting the PostScript 3 Compatible communication protocol.
Standard Used when the communication protocol is in ASCII interface.
BCP Used when the communication protocol is in binary format.
TBCP* Used when the communication protocol supports both ASCII and binary data to switch
between them according to the specified control code.
Binary Used when no special processing is required for data.
Off Disables the job time-out.
On
*
30 seconds
*
Sets the time the printer waits for data to arrive from the computer.
Available Range: 5–300 seconds
Normal
*
Sets the background suppression level to Normal .
High Sets the background suppression level to High.
Highest Sets the background suppression level to Highest.