Operation Manual

Copying 309
Select Tray
To select the tray:
1
Ta p Select Tray .
2 Tap the desired setting, and then tap OK .
* Denotes the factory default setting.
NOTE: Tray2 is only available when the optional 550-sheet feeder is installed.
NOTE: When Any is displayed as the paper size and type in the MPF, you can select the paper size and type from this
menu. For details, see "Select Tray."
2 Sided Copying
To make duplex copies with the specified binding position:
1
Swipe the screen until 2 Sided Copying appears, and then tap 2 Sided Copying .
2 Tap the desired setting, and then tap OK .
* Denotes the factory default setting.
When you are using the document glass and it is set to 1  2 Sided or 2  2 Sided , the display prompts you
for another page after tapping
Copy .
a If you want to place a new document, replace the document with a new document, and then tap Continue .
b If you finish copying, tap Print Now .
NOTE: When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set
Original
Size
to the same size as the document.
MPF The paper is fed from the multipurpose feeder.
Tray1* The paper is fed from tray1.
Tray2 The paper is fed from the optional 550-sheet feeder.
1  1 Sided* Select 1 sided or 2 sided and specify binding position for the 2 sided copy.
1  2 Sided
2  1 Sided
2  2 Sided
Long Edge Binding
Short Edge Binding