Operation Manual

Copying 315
Changing the Default Settings
The default settings of the copy menu options such as Select Tray and Darken/Lighten can be set to the
most frequently used modes. When you copy a document, the specified default settings are used unless they are
changed by using the operator panel.
The settings on Default Settings will be reflected when you create a new tile. If you change the settings on
Default Settings after creating the new tile, it does not affect the settings of the tile you created earlier. For
details about creating a new tile, see "Adding a New Tile."
To create your own default settings:
1
Press the (Information) button.
2 Ta p t h e Tools tab, and then tap Default Settings .
3 Ta p Copy Defaults .
4 Tap until the desired menu item appears, and then tap that menu item.
5 Tap the desired setting or enter the value, and then tap OK .
6 Repeat steps 4 and 5 as needed.