Operation Manual

Loading Print Media | 197
5 Make sure that paper guides rest lightly against the edge of the print media stack.
NOTE:
• Overtightening the guides may cause jams.
• When loading user-specified print media, adjust the width guides and slide the extendable
part of the tray by pinching the length guide and sliding it until it rests lightly against the edge
of the paper.
6 Insert the tray into the printer and push until it stops.
NOTE:
• If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.
7 When the Tray Configuration screen appears, tap Size.