Users Guide
Setting boot volume
Perform the following steps to set up boot volume in the conguration utility.
1 Enter the BIOS conguration Utility.
The Device Settings screen displays a list of Dell HBA cards.
NOTE: After entering BIOS conguration Utility Ctrl+C, ensure that you provide all the available devices in the system to set
the BIOS boot order as the order is reset everytime you enter the BIOS conguration Utility Ctrl+C.
2 Select any of the Dell HBA cards and press Enter. For example, select Dell HBA330 Mini and press Enter.
The selected Dell HBA card controller properties are displayed.
3 Use the arrow keys to select SAS Topology and press Enter.
4 Select Direct Attach Devices and press Enter.
The list of Direct Attach Devices controller properties and Device Info is displayed.
5 To view the list of boot selection keys, press Alt+M.
6 To select or deselect a direct attach device as the preferred not device, press Alt+B.
7 To select or deselect a device as the alternate boot direct attach device, press Alt+A.
BIOS Conguration Utility 31