Users Guide

Device Properties
Device properties allows you to view the properties of the device.
1. To view the Device Properties screen, power on the system, press F2, and click System Setup Main Menu > Device
Settings > Dell HBA345 Front Configuration Utility > Device Properties > Enclosure (Bay ID=1, Enclosure
Level=1).
Table 5. Enclosure: Bay ID=1 properties
Option Description
Enclosure Logical ID Logical ID of the enclosure
Enclosure Level Level of the enclosure
Bay ID Bay ID of the enclosure
Vendor Name Vendor name of the enclosure
Product Name Product name of the enclosure
Product Revision Product revision of the enclosure
Number of Slots Number of slots that the enclosure supports
2. Click <Slot 0> SAS-HDD-SEAGATE ST600MM0069 to view the Enclosure: Enclosure Level=1 properties.
Table 6. Enclosure: Enclosure Level=1 properties
Option Description
Device Type Type of the physical disk.
Protocol The drive protocol.
Slot Number Drive slot number in the enclosure.
Vendor Name Vendor name of the drive.
Product Name Product name of the drive.
Revision Name Revision version of the drive.
Serial Number Serial of the physical disk.
Capacity Capacity of the drive.
Sector Size Sector size of the selected physical disk.
Multipath Device Drive supports multipath or not.
SAS address SAS address of the physical disk.
Negotiated Logical link Rate Negotiated logical link rate of the device.
Negotiated Physical link Rate Negotiated physical link rate of the device.
Maximum Drive Rate Maximum possible drive rate.
Write Cache You can either enable or disable the Write Cache.
Locate LED You can either select On or Off the locate LED.
Legacy OpROM Boot Device You can either select Yes or No.
3. Click Apply Changes to submit the changes selected.
A confirmation screen is displayed. Click Ok to continue.
18
Human Interface Infrastructure configuration utility