Users Guide
Table Of Contents
- Dell Technologies Host Bus Adapter User's Guide HBA355i and HBA355e
- Dell HBA355i and Dell HBA355e
- Dell HBA355i
- Dell HBA355i front card
- Dell HBA355e
- Dell HBA355i and Dell HBA355e technical specifications
- PowerEdge systems supported by Dell HBA355i
- PowerEdge systems supported by Dell HBA355e
- Operating systems supported by Dell HBA355i and Dell HBA355e
- MD1400 and MD1420 enclosure support for Dell HBA355e
- Port support matrix for dual path on the same MD1400 and MD1420 enclosure
- ME484 enclosure support for Dell HBA355e
- Port support matrix for dual path on the same ME484 enclosure
- Tape drive support for Dell HBA355e
- Applications supported by Dell HBA355i and Dell HBA355e
- Dell HBA355e enclosure support
- Features of Dell HBA355i and Dell HBA355e
- Installation and removal of cards
- Safety instructions
- Before working inside your system
- After working inside your system
- Remove the Dell HBA355i adapter
- Install the Dell HBA355i adapter
- Remove the Dell HBA355i front card
- Install the Dell HBA355i front card
- Remove the Dell HBA355e adapter
- Install the Dell HBA355e adapter
- Connect Dell HBA355e to the storage enclosure
- Driver support Dell HBA355i and Dell HBA355e
- Manage Dell HBA355i and Dell HBA355e cards using HII configuration utility
- Updating the firmware of Dell HBA355i and Dell HBA355e
- Getting help
- Troubleshooting
- Known issues
- VendorID and ProductID for tape drives
- System reserved partition after Windows installation
- Device settings in HII shows PCIe slot information
- Intermittent RSODs appears when a faulty drive is connected to HBA
- Selecting drive for operating system installation in legacy mode
- Adapter configuration change message
- Incompatible firmware image when incorrect payload is used
- Additional disks displayed in the command line interface
- Known issues
- Documentation resources
Dell HBA355i and Dell HBA355e
Dell Technologies Host Bus Adapter 355i (Dell HBA355i) are non–RAID solution cards that can be used as a boot controller and
also as a data controller.
Dell Technologies Host Bus Adapter 355e(Dell HBA355e) is a non-RAID solution card that is used as a data controller by
connecting to external JBODs and tape drives.
The features of the cards include:
● All are PCIe cards with Gen 4 PCIe x eight host interfaces.
● All provide dual SAS/SATA Gen 3 device interfaces.
● Each supports both SAS and SATA drives.
● HBA355i has x16 SAS lanes for a target device and can support up to 16 drives without expander.
● HBA355e has x16 lanes that can be connected to external target devices such as enclosures (ME484, MD1420, and
MD1400) and tape drives(LTO6/7/8).
NOTE: For the safety, regulatory, and ergonomic information that is associated with these devices, and for more
information about the Integrated Dell Remote Access Controller (iDRAC) or Lifecycle Controller (LC) remote management,
see your platform documentation.
Topics:
• Dell HBA355i
• Dell HBA355i front card
• Dell HBA355e
• Dell HBA355i and Dell HBA355e technical specifications
• PowerEdge systems supported by Dell HBA355i
• PowerEdge systems supported by Dell HBA355e
• Operating systems supported by Dell HBA355i and Dell HBA355e
• MD1400 and MD1420 enclosure support for Dell HBA355e
• Port support matrix for dual path on the same MD1400 and MD1420 enclosure
• ME484 enclosure support for Dell HBA355e
• Port support matrix for dual path on the same ME484 enclosure
• Tape drive support for Dell HBA355e
1
Dell HBA355i and Dell HBA355e 5