Connectivity Guide

About this Manual
This manual provides information about supported software and hardware configurations for Dell EMC Hybrid Cloud System for Microsoft.
This manual is valid for all versions of Dell EMC Hybrid Cloud System for Microsoft.
NOTE: The information in this manual is subject to change without notice. Contact your Dell EMC Support
representative for more information.
NOTE: Where appropriate, this manual lists both the minimum supported version and the latest supported version. Dell
EMC recommends using the latest supported version.
NOTE: The recommendations and guidelines in this document are based on industry best practices, CPS Standard
architecture requirements, and Dell EMC lab testing. If not followed, the functionality and or management of the
solution may not work as designed or expected, and problem resolution may be limited, delayed, or not viable.
CAUTION: The addition of any non-DHCS hardware to your system will cause the Patch and Update process to fail.
Revision History
Table 1. Document Revisions
Revision Date Changes from Previous Revision
A00 December 2015 Initial release of the Dell Hybrid Cloud System for Microsoft
Support Matrix
A02 February 2016 Updated the firmware matrix for release 1.0.2:
• Near-line SAS drives
• iDRAC
• Fixed table headers
A03 May 2016 Updated the matrix for release 1.1:
• BIOS
• Firmware
• Drivers
• Additional HDDs and SSDs
• Updates to support Intel E5 v4 processors
A04 July 2016 Updated the matrix for release 1.1.1:
• BIOS
• Firmware
• Drivers
• Additional hard drives
A05 August 2016 Updated the matrix for release 1.1.2:
• BIOS
• Firmware
• Drivers
• Additional hard drives
Preface
4 About this Manual