User Manual

Removing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board shield.
Procedure
1 Disconnect the microphone cable from the system board.
2 Note the routing of the microphone cable, and then remove it from the routing
guides on the display-assembly base.
3 Remove the screw (M2x2.5) that secures the microphone board to the display-
assembly base.
45