User Manual

Removing the speakers

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

1 Remove the stand.

2 Remove the back cover.

3 Remove the system-board shield.

Procedure

1 Disconnect the speaker cable from the system board.

2 Remove the four screws (M3 4+7.1 XZN) that secures the tape to the display-

assembly base.

3 Lift the speaker (SPK1) from the display-assembly base.

4 Note the routing of the speaker cable and remove the speaker cable from the

routing guides.