User Manual

Removing the display panel

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

1 Remove the stand.

2 Remove the back cover.

3 Remove the system-board shield.

Procedure

1 Disconnect the touch-screen cable from the system board.

2 Peel o the tape that secures the display cable to the connector on the system

board.

3 Using your nger tips, push the securing clips on the display cable inwards and

disconnect it from the system board.

4 Disconnect the display back-light cable from the display panel.