User Manual

Replacing the middle frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the middle frame onto the display-assembly base.
2 Snap the middle frame and display-assembly base into place.
3 Replace the 13 screws (M3x5 black) that secure the middle frame to the display-
assembly base.
Post-requisites
1 Replace the rubber feet.
2 Replace the display panel.
3 Replace the system board.
4 Replace the speakers.
5 Replace the heat sink.
6 Replace the fan.
7 Replace the coin-cell battery.
8 Replace the camera.
9 Replace the microphone.
10 Replace the power-button board.
11 Replace the media-card reader.
12 Replace the antenna.
13 Replace the wireless card.
14 Replace the memory module.
15 Replace the system-board shield.
85