User Manual
Table Of Contents
- Dell G3 3590 Service Manual
- Safety instructions
- Removing and installing components
- Device drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
Maintenance
Default: OFF.
Allow BIOS Downgrade Controls ashing of the system rmware to previous revisions.
Default: ON.
Table 16. System setup options—System Logs menu
System Logs
Power Event Log Displays Power events.
Default: Keep.
BIOS Event Log Displays BIOS events.
Default: Keep.
Thermal Event Log Displays Thermal events.
Default: Keep.
Table 17. System setup options—SupportAssist menu
SupportAssist
Dell Auto operating system Recovery
Threshold
Controls the automatic boot ow for SupportAssist System Resolution Console and
for Dell operating system Recovery tool.
Default: 2.
SupportAssist operating system Recovery Enables or disables the boot ow for SupportAssist operating system Recovery tool in
the even of certain system errors.
Default: ON.
Identifier GUID-52E6F16C-1AA9-4088-98C2-CCFF3BE77302
Status Released
Clearing CMOS settings
About this task
CAUTION
: Clearing CMOS settings will reset the BIOS settings on your computer.
Steps
1 Remove the base cover.
2 Disconnect the battery cable from the system board.
3 Remove the coin-cell battery.
4 Wait for one minute.
5 Replace the coin-cell battery.
6 Connect the battery cable to the system board.
7 Replace the base cover.
66
System setup