User Manual

NOTE: Connected USB devices will not charge when the computer is turned off. Please set BIOS Deep Sleep control

to disabled to start charging when the computer is powered off.

6. Network port

Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access, with a transfer rate of

10/100/1000 Mbps.

7. USB 2.0 port with Power on/Wake-up support

Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 480 Mbps. Wake the computer

from standby with the keyboard or mouse connected to this port.

NOTE: Please set BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.

8. USB 3.1 Gen 1 port with Power on/Wake-up support

Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. Wake the computer

from standby with the keyboard or mouse connected to this port.

NOTE:

Please set BIOS Deep Sleep control to disabled to enable Wake up when the computer is powered off.

9. USB 3.1 Gen 1 port

Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps.

10. USB 3.1 Gen 1 port with PowerShare

Connect peripherals such as external storage devices and printers.

Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge connected USB devices.

NOTE: Connected USB devices will not charge when the computer is turned off. Please set BIOS Deep Sleep control

to disabled to start charging when the computer is powered off.

11. Audio-out port

Connect audio-output devices such as speakers, amplifiers, and so on.

12. SD-card slot

Reads from and writes to the SD card, supporting the following cards:

• SD card

• SD High Capacity (SDHC) card

• SD Extended Capacity (SDXC) card

• micro Secure Digital (mSD)

• micro Secure Digital High Capacity (mSDHC)

• micro Secure Digital Extended Capacity (mSDXC)

Bottom

1. Power button

Views of Inspiron 24-5490