Owners manual

Removing the optical-drive
interposer
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the optical drive.
2 Remove the base cover.
Procedure
1 Open the latch and disconnect the display cable from the system board.
2 Lift the latch and pull the optical-drive interposer cable from the system
board and the optical-drive board connector.
3 Remove the screws that secure the optical-drive interposer to the palm
rest and keyboard assembly.
32