User Manual

Table Of Contents
Removing the fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
Remove the base cover.
Procedure
1 Peel the tape o the heat sink.
2 Disconnect the fan cable from the system board. Note the cable routing and remove the fan cable and the antenna cable from the
routing guides on the fan.
3 Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
4 Lift the fan o the palm-rest and keyboard assembly.
16
Removing the fan 29