User's Manual

224 RACADM Subcommand Overview
Supported Interfaces
• Local RACADM
config
Table A-2 describes the config and getconfig subcommands.
Synopsis
racadm config [-c|-p] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i
<
index >] < value >
Supported Interfaces
• Local RACADM
Description
The config subcommand allows you to set iDRAC configuration parameters
individually or to batch them as part of a configuration file. If the data is
different, that iDRAC object is written with the new value.
Input
Table A-3 describes the config subcommand options.
Table A-2. config/getconfig
Subcommand Definition
config Configures the iDRAC.
getconfig Gets the iDRAC configuration data.
Table A-3. config Subcommand Options and Descriptions
Option Description
-f The -f <filename> option causes config to read the contents of the file
specified by <filename> and configure the iDRAC. The file must contain
data in the format specified in "Configuration File Syntax" on page 167.