User's Manual

238 RACADM Subcommand Overview
NOTICE: This command deletes your current iDRAC configuration and resets the
iDRAC configuration to the default settings. After reset, the default name and
password are root and calvin, respectively, and the IP address is 192.168.0.120 plus
the number of the slot the server inhabits in the chassis.
serveraction
Table A-16 describes the serveraction subcommand.
Synopsis
racadm serveraction < action >
Description
The serveraction subcommand enables users to perform power management
operations on the host system. Table A-17 describes the serveraction power
control options.
Table A-16. serveraction
Subcommand Definition
serveraction Executes a managed server reset or power-on/off/cycle.
Table A-17. serveraction Subcommand Options
String Definition
<action> Specifies the action. The <action> string options are:
• powerdown — Powers down the managed server.
•
powerup — Powers up the managed server.
•
powercycle — Issues a power-cycle operation on the managed server.
This action is similar to pressing the power button on the system’s
front panel to power down and then power up the system.
•
powerstatus — Displays the current power status of the server ( ON , or
OFF ).
•
hardreset — Performs a reset (reboot) operation on the managed
server.