User's Manual

242 RACADM Subcommand Overview
Output
The default output display shows the record number, timestamp, severity, and
description.
For example:
Record: 1
Date/Time: 11/16/2005 22:40:43
Severity: Ok
Description: System Board SEL: event log sensor for
System Board, log cleared was asserted
Supported Interfaces
• Local RACADM
clrsel
Synopsis
racadm clrsel
Description
The clrsel command removes all existing records from the System Event Log
(SEL).
Supported Interfaces
• Local RACADM
gettracelog
Table A-22 describes the gettracelog subcommand.
Table A-22. gettracelog
Command Definition
gettracelog -i Displays the number of entries in the iDRAC trace
log.
gettracelog Displays the iDRAC trace log.