User's Manual

50 Configuring the Management Station
You can use the netstat -a command on Windows or Linux operating systems
to see if a TFTP server is already listening. Port 69 is the TFTP default port. If
no server is running, you have the following options:
• Find another computer on the network running a TFTP service
• If you are using Linux, install a TFTP server from your distribution
• If you are using Windows, install a commercial or free TFTP server
Installing Dell OpenManage IT Assistant
Your system includes the Dell OpenManage System Management Software
Kit. This kit includes, but is not limited to, the following components:
• Dell Systems Management Consoles CD — Contains all the latest Dell
systems management console products, including Dell OpenManage IT
Assistant.
•
Dell PowerEdge Service and Diagnostic Utilities CD — Provides the tools
you need to configure your system and delivers firmware, diagnostics, and
Dell-optimized drivers for your system.
•
Dell PowerEdge Documentation CD — Helps you stay current with
documentation for systems, systems management software products,
peripherals, and RAID controllers.
• Dell Support website and Readme files — Check Readme files and the
Dell Support website at
support.dell.com for the most recent information
about your Dell products.
Use the Dell System Management Consoles CD to install the management
console software, including Dell OpenManage IT Assistant, on the
management station. For instructions on installing this software, see your
Quick Installation Guide.