User's Manual

Configuring the iDRAC Using the Web Interface 61
Configuring Platform Events
Platform event configuration provides a mechanism for configuring the
iDRAC to perform selected actions on certain event messages. The actions
include no action, reboot system, power cycle system, power off system, and
generate an alert (Platform Event Trap [PET] and/or e-mail).
IP Blocking
Enabled
Enables the IP address blocking feature, which limits the
number of failed login attempts from a specific IP address for a
preselected time span. The default is off.
IP Blocking Fail
Count
Sets the number of login failures attempted from an IP address
before the login attempts are rejected from that address. The
default is 10.
IP Blocking Fail
Window
Determines the time span in seconds within which IP Block
Fail Count failures must occur to trigger the IP Block Penalty
Time. The default is 3600.
IP Blocking Penalty
Time
The time span in seconds that login attempts from an IP
address with excessive failures are rejected. The default is 3600.
Table 5-5. Network Security Page Buttons
Button Description
Print Prints the Network Security values that appear on the screen.
Refresh Reloads the Network Security page.
Apply Saves any new settings that you made to the Network Security
page.
Go Back to
Network Page
Returns to the Network page.
Table 5-4. Network Security Page Settings (continued)
Settings Description