User's Manual

100 Configuring the iDRAC Using the Web Interface
Timeout The time, in seconds, that a connection is allowed to
remain idle. The session is cancelled when the timeout is
reached. Changes to the timeout setting take affect
immediately and will reset the web server. Timeout range is
60 to 10,800 seconds. The default is 1,800 seconds.
HTTP Port Number The port on which the iDRAC listens for a browser
connection. The default is 80.
HTTPS Port Number The port on which the iDRAC listens for a secure browser
connection. The default is 443.
Table 5-31. SSH Settings
Setting Description
Enabled Enables or disables SSH. When checked, the checkbox
indicates that SSH is enabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Only one session is supported.
Active Sessions The number of current sessions on the system.
Timeout The secure shell idle timeout, in seconds. Timeout range is
60 to 10,800 seconds. Enter 0 seconds to disable the
Timeout feature. The default is 1,800.
Port Number The port on which the iDRAC listens for an SSH
connection. The default is 22.
Table 5-32. Telnet Settings
Setting Description
Enabled Enables or disables telnet. When checked, telnet is
enabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Only one session is supported.
Active Sessions The number of current sessions on the system.
Table 5-30. Web Server Settings (continued)
Setting Description