User's Manual

Viewing the Configuration and Health of the Managed Server 141
• Hardware Version — The version number of the primary planar (circuit
board) of the managed server.
• IP Address — The IP address associated with the iDRAC (not the
managed server).
• Gateway — The IP address of the network gateway configured for the
iDRAC.
• Subnet Mask — The TCP/IP Subnet Mask configured for iDRAC.
• MAC Address — The MAC address associated with the LOM (LAN on
Motherboard) Network Interface Controller of the iDRAC.
• DHCP Enabled — Enabled if the iDRAC is set to fetch its IP address and
associated info from a DHCP server.
• Preferred DNS Address 1 — Set to the currently active primary DNS
server.
• Alternate DNS Address 2 — Set to the alternate DNS server address.
NOTE: This information is also available at iDRAC→ Properties tab→ iDRAC
Information.
WWN/MAC Summary
Click System→ Properties tab→ WWN/MAC to view the current
configuration of installed I/O Mezzanine cards and their associated network
fabrics. If the FlexAddress feature is enabled, the globally assigned (Chassis-
Assigned) persistent MAC addresses supersede the hardwired values of each
LOM.
System Health
Click System→ Properties tab→ Health to view important information about
the health of the iDRAC and components monitored by the iDRAC. The
Severity column shows the status for each component. For a list of status
icons and their meaning, see Table 15-3. Click the component name in the
Component column for more detailed information about the component.
NOTE: Component information can also be obtained by clicking the component
name in the left pane of the window. Components remain visible in the left pane
independent of the tab/screen that is selected.