User's Manual

142 Viewing the Configuration and Health of the Managed Server
iDRAC
The iDRAC Information page lists a number of important details about the
iDRAC, such as health status, name, firmware revision, and network
parameters. Additional details are available by clicking the appropriate tab at
the top of the page.
CMC
The CMC page displays the health status, firmware revision, and IP address
of the Chassis Management Controller. You can also launch the CMC Web
Interface by clicking the Launch the CMC Web Interface button.
Batteries
The Batteries page displays the status and values of the system board coin-cell
battery that maintains the Real-Time Clock (RTC) and CMOS configuration
data storage of the managed system.
Temperatures
The Temperature Probes Information page displays the status and readings of
the on-board ambient temperature probe. Minimum and maximum
temperature thresholds for warning or failure states are shown, along with the
current health status of the probe.
Voltages
The Voltage Probes Information page displays the status and reading of the
Voltage probes, providing such information as the status of the on-board
voltage rail and CPU core sensors.
NOTE: Depending on the model of your server, temperature thresholds for warning
or failure states and/or the health status of the probe may not be displayed.
Power Monitoring
The Power Monitoring page enables you to view the following monitoring and
power statistics information:
• Power Monitoring — Displays the amount of power being used (in watts)
by the server as reported by the System Board Current Monitor.