User's Manual

Viewing the Configuration and Health of the Managed Server 143
• Power Tracking Statistics — Displays information about the amount of
power used by the system since the
Measurement Start Time was last
reset.
• Peak Statistics — Displays information about the peak amount of power
used by the system since the
Measurement Start Time was last reset.
NOTE: iDRAC power management logic utilizes a Complex Programmable Logic
Device (CPLD) present in the blade server. Updates to CPLD devices are available at
the Dell Support website at support.dell.com under the System Firmware or System
Board sections. Dell recommends that you update your blade server with the latest
CPLD firmware version. The current CPLD firmware version is displayed in the
iDRAC Web GUI.
CPU
The CPU Information page reports the health of each CPU on the managed
server. This health status is a roll-up of a number of individual thermal, power,
and functional tests.
POST
The Post Code page displays the last system post code (in hexadecimal) prior
to booting the operating system of the managed server.
Misc Health
The Misc Health page provides access to the following system logs:
System Event Log — Displays system-critical events that occur on the
managed system.
Post Code — Displays the last system post code (in hexadecimal) prior to
booting the operating system of the managed server.
Last Crash — Displays the most recent crash screen and time.
Boot Capture — Provides playback of the last three boot screens.
NOTE: This information is also available at System→ Properties tab→ Logs.