User's Manual

Recovering and Troubleshooting the Managed Server 279
How can I find the IP
address of the CMC?
From the iDRAC Web interface:
• Click System → Remote Access → CMC .
The CMC IP address is displayed on the
CMC page.
OR
• Select the "Dell CMC" console in the OSCAR to log
into the CMC through a local serial connection. CMC
RACADM commands can be issued from this
connection. See the
Dell Chassis Management
Controller Administrator Reference Guide
for a
complete list of the CMC RACADM subcommands.
$ racadm getniccfg -m chassis
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.151
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
The iDRAC network
connection is not working.
• Ensure the LAN cable is connected to the CMC.
• Ensure the iDRAC LAN is enabled.
I inserted the server into
the chassis and pressed the
power button, but nothing
happened.
• The iDRAC requires about 30 seconds to initialize
before the server can power up. Wait for 30 seconds and
then press the power button again.
• Check the CMC power budget. The chassis power
budget may be exceeded.
Table 15-17. Frequently Asked Questions/Troubleshooting (continued)
Question Answer