User's Manual

iDRAC SMCLP Property Database 361
1 (Enabled)
Default
0
Description
Specifies whether DHCP is used to assign the iDRAC IP address. If this
property is set to 1 (Enabled), the iDRAC IP address, subnet mask, and
gateway are assigned from the DHCP server on the network. If this property is
set to 0 (Disabled), the static IP address, subnet mask, and gateway gain
values inserted manually by the user.
committed (Read/Write)
Legal Values
0 (Pending commit)
1 (Committed)
Default
1
Description
Enables the user to change the IP address and/or subnet mask without
terminating the current session. If this property is set to 1 (Committed), the
IP address and subnet mask are valid. A change in either the IP address or the
subnet mask automatically converts this property to 0 (Pending commit). For
the network settings to take effect, the property must be set back to 1.
/system1/sp1/enetport1/lanendpt1/ipendpt1/dnse
ndpt1
oemdell_domainnamefromdhcp (Read/Write)
Legal Values
0 (Disabled)