User's Manual

82 Configuring the iDRAC Using the Web Interface
b In the Network Configuration page under IPMI LAN Settings , select
Enable IPMI Over LAN .
c Update the IPMI LAN channel privileges, if required:
NOTE: This setting determines the IPMI commands that can be executed
from the IPMI over LAN interface. For more information, see the IPMI 2.0
specifications.
Under IPMI LAN Settings , click the Channel Privilege Level Limit
drop-down menu, select
Administrator , Operator , or User and click
Apply .
d Set the IPMI LAN channel encryption key, if required.
NOTE: The iDRAC IPMI supports the RMCP+ protocol.
NOTE: The encryption key must consist of an even number of hexadecimal
characters with a maximum length of 20 characters.
Under IPMI LAN Settings in the Encryption Key field , type the
encryption key.
e Click Apply .
3 Configure IPMI Serial over LAN (SOL).
a Click System → Remote Access → iDRAC .
b Click the Network Security tab, then click Serial Over LAN .
c On the Serial Over LAN Configuration page, click the Enable Serial
Over LAN
checkbox to enable Serial over LAN.
d Update the IPMI SOL baud rate.
NOTE: To redirect the serial console over the LAN, ensure that the SOL baud
rate is identical to your managed server’s baud rate.
Click the Baud Rate drop-down menu to select a data speed of
19.2 kbps, 57.6 kbps or 115.2 kbps.
e Click Apply .