Users Guide

230 Using the Local RACADM Command Line Interface
3 Configure your PET policy using the following command:
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertDestIPAddr -i <
index > <IP-address>
where < index > is the PET destination index and < IP-address > is the
destination IP address of the system that receives the platform event alerts.
4 Configure the Community Name string.
At the command prompt, enter:
racadm config -g cfgIpmiLan -o
cfgIpmiPetCommunityName
<name>
where < name > is the PET Community Name.
Configuring E-mail Alerts
1 Enable global alerts by entering the following command:
racadm config -g cfgIpmiLan -o
cfgIpmiLanAlertEnable 1
2
Enable e-mail alerts by entering the following commands:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable -i <
index > <0|1>
where < index > is the e-mail destination index and 0 disables the e-mail
alert or 1 enables the alert. The e-mail destination index can be a value
from 1 through 4.
For example, to enable e-mail with index 4, enter the following command:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable -i 4 1
3
Configure your e-mail settings by entering the following command:
racadm config -g cfgEmailAlert -o
cfgEmailAlertAddress -i 1
<email-address>
where 1 is the e-mail destination index and < email-address > is the
destination e-mail address that receives the platform event alerts.