Integrated Dell Remote Access Controller 6 (iDRAC6) Version 2.
Release Notes iDRAC is a systems management hardware and software solution that provides remote management capabilities, crashed system recovery, and power control functions for Dell PowerEdge systems. Version iDRAC6 2.85.04 Rev A00 Release Date February 2016 Previous Version iDRAC6 2.80 Importance RECOMMENDED: Dell recommends applying this update during your next scheduled update cycle.
• Dell EqualLogic DX6000 • Dell EqualLogic FS7500 • Dell EqualLogic DX6012S • Dell EqualLogic DX6000G What is Supported? Supported Managed Server Operating Systems The following operating systems support iDRAC6: • Microsoft Windows Server 2003 family: o Windows Server 2003 R2 (Standard, Enterprise, and DataCenter Editions) with SP2 (x86, x86_64) o Windows Server 2003 Compute Cluster Edition • Microsoft Windows Server 2008 SP2 (Standard, Enterprise, and DataCenter Editions) (x86, x86_64) • Mi
Note: Use the Dell-customized ESXi 4.0 Update 1 Embedded edition. This image is available at support.dell.com and vmware.com. The remote deployment and local installation of ESXi through Virtual Media is not supported for standard ESXi Embedded version 4.0, as the installation may fail with the error message, "Installation failed as more than one USB device found." Supported Web Browsers • Microsoft Internet Explorer 7.
• Lifecycle Controller version is not displayed on the iDRAC web interface after Lifecycle Controller is updated using the Remote Enablement (RE) Services. • Security fix — Administrators can leverage XSS in the web interface. • Exporting the server profile using the WS-MAN interface fails. • Login to iDRAC web interface using the Smart Card option fails. • Driver pack components are not displayed in the System Inventory page in the iDRAC web interface.
Make sure the client system also has this DNS in its DNS list. Versions/Systems Affected All iDRAC6 supported Dell PowerEdge systems. Issue 3 Description When you try to upload files other than the original SSL certificate files in the Upload Certificate page, iDRAC Web interface may log out. Resolution Log in to the Web interface again and upload the correct SSL certificate. Versions/Systems Affected All iDRAC6 supported Dell PowerEdge systems.
certificate info>, Peer certificate issuer has been marked as not trusted by the user. (Error code: sec_error_untrusted_issuer)." Resolution Create a certificate request and issue it to a trusted domain. Register it to a domain DNS server. Use a trusted domain name, instead of the IPv6 address. Versions/Systems Affected All iDRAC6 supported Dell PowerEdge systems.
Issue 10 Description When the Certificate Authority (CA) is enabled, the Domain Controller (DC) is specified as FQDN and Global Catalog (GC) as IP address, the authentication using Test Settings fails and normal login succeeds. The expected behavior is the authentication using Test Settings must succeed by using DC FQDN. Resolution Specify the FQDN for GC. Versions/Systems Affected All iDRAC6 supported Dell PowerEdge systems.
Installation Installation and Configuration Notes For more information about iDRAC6, including installation and configuration information, see the Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise Version 1.95 User Guide and the Dell OpenManage Server Administrator User's Guide. These documents are located on the Dell Support website at dell.com/support/manuals. Upgrade Upgrading from iDRAC6 version 2.80 to 2.85. Uninstallation • Use the rollback feature to uninstall iDRAC6 version 2.80.
• • For OpenManage Connections Enterprise systems management documents — dell.com/OMConnectionsEnterpriseSystemsManagement For OpenManage Connections Client systems management documents — dell.com/OMConnectionsClient -----------------------------------------------------------------------------Information in this document is subject to change without notice. © 2016 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.