iDRAC7/8 with Lifecycle Controller Version 2.65.65.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview..................................................................................................................................... 4 Version.................................................................................................................................................................................... 4 2 Platforms affected....................................................................................................................... 5 3 What is supported......
1 Overview The Integrated Dell Remote Access Controller (iDRAC) is designed to make server administrators more productive and improve the overall availability of Dell servers. iDRAC alerts administrators to server issues, helps them perform remote server management, and reduces the need for physical access to the server. Additionally, iDRAC enables administrators to deploy, monitor, manage, configure, update, and troubleshoot Dell EMC servers from any location without using any agents.
2 Platforms affected • • • • • • • • • • • • • • • • • PowerEdge FM120 PowerEdge M420 PowerEdge M520 PowerEdge M620 PowerEdge M820 PowerEdge R220 PowerEdge R320 PowerEdge R420 PowerEdge R520 PowerEdge R620 PowerEdge R720 PowerEdge R720xd PowerEdge R820 PowerEdge R920 PowerEdge T320 PowerEdge T420 PowerEdge T620 Platforms affected 5
3 What is supported License requirements • • Software licensing has replaced hardware licensing. Many features in Lifecycle Controller are licensed. You must install the appropriate license to use these features. For more information, see the iDRAC 2.60.60.60 User's Guide available at www.dell.com/idracmanuals.
Java support • Java — Oracle version OpenSource tools • • • • • • • OpenJDK 8u202 Adopt Open JDK You may utilize an open source version of AdoptOpenJDK or OpenJDK ("Adopt Open JDK") subject to the terms and conditions of the Adopt Open JDK community at https://adoptopenjdk.net/. You use Adopt Open JDK at your own risk. Adopt Open JDK may not meet your requirements or expectations. It could include quality, technical or other mistakes, inaccuracies or typographical errors.
4 New and enhanced features • 8 N/A New and enhanced features
5 Fixes Security • • • • 117351: Added HSTS header (Port 443) 124554: Added HSTS header (Port 5900) 156829, 156831, 156819 - Removed the Use of Static Key ciphers Fixed CVE-2018-15473, CVE-2019-11477, CVE-2019-11478, CVE-2019-11479 NOTE: CVE-2018-15473 was fixed through a patch to the OpenSSH version. As a result, not all scanners are aware of the patch and may flag this as a potential vulnerability based on the OpenSSH version.
6 Important notes 1. When firmimg.d7 update from HTTPs share using firmware RACADM update is performed, it displays an additional error message RAC989 intermittently, along with the completion message RAC987. During this update, the proxy is enabled. When this error is displayed, a corresponding job state shall be monitored using any of the iDRAC interfaces (RACADM/GUI/WSMAN) to check the update status. 2. When firmimg.
7 Limitations • • • • • • Systems with iDRAC firmware version 2.65.65.65 installed do not have any real time functionality for the slow/full initialization operation on drives. Check the System Setup/BIOS (F2) for these operations. If Flex Address is enabled on Chassis Management Controllers (CMC), iDRAC and LC do not display the same MAC addresses. To view the chassis-assigned MAC address, use the iDRAC web interface or the CMC web interface. Go to General > Network Settings.
• • • • • • • • • • • • • • Emulex OneConnect OCm14102-U5-D 2-port 10 GbE Mezz CNA • Emulex OneConnect OCm14102-U4-D 2-port 10 GbE bNDC CNA • Emulex OneConnect OCe14102-N1-D 2-port PCle 10 GbE NIC • Emulex OneConnect OCm14104-N1-D 4-port 10 GbE rNDC CNA • Emulex OneConnect OCm14102-N5-D 2-port 10 GbE Mezz CNA • Emulex OneConnect OCm14102-N6-D 2-port 10 GbE bNDC CNA LC may display multiple drive names for some CDs or DVDs, such as the ones containing operating systems.
8 Known issues Error message when firmware updated using remote racadm Description The following message is displayed when the firmware is updated using remote racadm — Error: Session is not valid. Workaround Ignore this message. Systems affected All systems supported by this release. Tracking number N/A Error during patch operation of BootSource properties on /redfish/v1/Systems/ System.Embedded.
9 Installation Installation instructions • • • From the Windows host operating system (managed node), run the Dell Update Package for Windows and follow the instructions on the update wizard. From the Linux host operating system (managed node), run the Dell Update Package for Linux from the shell prompt. Follow the instructions displayed on the console. From the management station, remotely update the firmware using the iDRAC web interface: 1. 2. 3. 4. 5.
10 Lifecycle Controller Remote Services — client tools Use the OpenWSMAN CLI client tool to send WS-MAN commands to Lifecycle Controller. OpenWSMAN CLI OpenWSMAN CLI is an open source Linux WS-MAN client. OpenWSMAN CLI source code and installation details are available at http:// sourceforge.net/projects/openwsman/files/wsmancli. Sample OpenWSMAN CLI Command (Enumeration Operation): wsman enumerate http://schemas.dmtf.
11 Resources and support For more information about the features of this release, see the documentation for iDRAC 2.60.60.60. Latest Release Notes To access the latest Release Notes for this version of iDRAC: 1. 2. 3. 4. Go to www.dell.com/idracmanuals. Click the link for the generation and then click the firmware series of iDRAC. Click DOCUMENTATION. Click MANUALS AND DOCUMENTS. Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number...
12 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
