Reference Guide

cfgDNSStaticDomainNameFromDHCP (Read or Write)
Description
Specifies the device DNS static domain name.
Legal Values
• 0 — Do not use DHCP to get the Domain Name
• 1 — Use DHCP to get the Domain Name
Default
0 — Disabled
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for email alerts.
To apply this setting to iDRAC, use the —m option.
Use this object with the config or getconfig subcommands.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read or Write)
Description
Enables or disables firmware update from a network TFTP server.
NOTE: This object is read-only for iDRAC Modular servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgRhostsFwUpdateIpAddr (Read or Write)
Description
Specifies the network TFTP server IPv4 or IPv6 address that is used for TFTP firmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Description
Specifies TFTP path where firmware image file exists on the TFTP server. The TFTP path is relative to the
TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from iDRAC if the alerts are configured and enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.2.
Default
For IPv4, it is 0.0.0.0
108