Reference Guide

• To display a single object for the specified group, run:
racadm get device.<group name>.<index>.<object name>
Example
racadm get nic.nicconfig.3.legacybootproto
[Key=NIC.Integrated.1-3#NICConfig]
Legacybootproto=PXE
RACADM Command Options
The following table lists the options for the RACADM command:
Table 1. RACADM Command Options
Option Description
-r <racIpAddr>
-r <racIpAddr> : <port number>
Specifies the controller’s remote IP address.
Use <port number> if the iDRAC port number is not the default
port (443).
-u <username>
Specifies the user name that is used to authenticate the command
transaction. If the-u option is used, the -p option must be used, and
the -i option (interactive) is not allowed.
-p <password>
Specifies the password used to authenticate the command
transaction. If the -p option is used, the -i option is not allowed.
--nocertwarn
Does not display certificate related warning message.
Using The Autocomplete Feature
Use the Autocomplete feature to:
• Display all the available RACADM commands in the alphabetical order on pressing the Tab key at the prompt.
• View the complete list, enter the starting letter of the command at the prompt and press Tab key.
• Navigate the cursor within a command, press:
Home key: directs to the starting of the command.
End key: directs to the end of the command.
• View the history of the commands that were run in the current session, press up and down arrow key.
• Exit the Autocomplete mode, enter Quit, Exit, or press Ctrl+D key.
For example:
• Example 1: racadm> <press tab>
arp
autoupdatescheduler
clearasrscreen
clearpending
closessn
clrraclog
.
.
.
.
.
.
.
vflashsd
vflashpartition
vmdisconnect
12