Reference Guide

Example
Single-object Set of real-time objects
• Configure LCD String.
$ racadm set system.lcd.LCDUserString test
• • Configure iDRAC name.
racadm set iDRAC.Info.Name idrac-server100
Single-object Set of staged objects
• Configure several BIOS settings, create a job to initiate application of new values, reboot the system, then wait
for the job to complete.
racadm set BIOS.SysProfileSettings.ProcTurboMode Disabled
racadm set BIOS.ProcSettings.ProcVirtualization Enabled
racadm set BIOS.ProcSettings.ControlledTurbo Enabled
racadm jobqueue create BIOS.Setup.1-1 –r Graceful
• Note of the Job ID output by the jobqueue command
• After reboot, wait for the job to complete by checking the job status
racadm jobqueue view –i <Job ID>
Multi-object Set of real-time objects
• Configure the iDRAC using a local INI file.
racadm set -f myidrac.ini
• Configure the iDRAC using a local Server Configuration Profile XML file containing only iDRAC settings.
racadm set -f myidrac.xml -t xml
• Configure the iDRAC using a Server Configuration Profile XML file stored on an NFS share containing only
iDRAC settings.
racadm set -f myidrac.xml -t xml -l 10.1.2.3:/myshare
• Import a Server Configuration Profile from a CIFS share, using only the iDRAC component.
racadm set -f file –t xml -u myuser -p mypassword -l //192.168.0/share -c
iDRAC.Embedded.1
Multi-object Set of staged objects
• Configure a systems using a local Server Configuration Profile XML file containing a mix of real-time and staged
objects; reboot the server gracefully with a wait time of ten minutes, leaving the server powered on after the
reboot.
racadm set -f myfile.xml -t xml -b "graceful" -w 600 -s "on"
• Make note of the Job ID output by the Set command.
• After reboot, wait for the job to complete by checking the job status.
racadm jobqueue view –i <Job ID>
• Configure a systems using a local Server Configuration Profile XML file containing a mix of real-time and staged
objects; postpone reboot until other operations have been completed.
racadm set -f myfile.xml -t xml -b NoReboot
• Make note of the Job ID output by the Set command; because of the NoReboot option, the job will be
pending until the server is rebooted
• Complete other operations, then perform a reboot
• After reboot, wait for the job to complete by checking the job status
racadm jobqueue view –i <Job ID>
• Verify the Server Configuration Profile XML file content located in a remote CIFS share.
racadm set -f temp_Configuration_file -t xml -u Administrator -p Password -
l //192.168.0/xyz –preview
• Configure a RAC from an XML configuration file located on a remote HTTP share.
racadm set -f myfile.xml -t xml -u httpuser -p httppwd -l http://test.com/
myshare
• Configure a RAC from an XML configuration file located on a remote HTTPS share.
racadm set -f myfile.xml -t xml -u httpsuser -p httpspwd -l https://
test.com/myshare
• Configure a RAC from a JSON configuration file located on a remote HTTPS share.
racadm set -f myfile.xml -t json -u httpsuser -p httpspwd -l https://
test.com/myshare
• Configure the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername admin1
• Remove the the proxy parameter.
racadm set lifecyclecontroller.lcattributes.UserProxyUsername
• View the list of proxy attributes.
racadm get lifecycleController.lcAttributes
106
RACADM Subcommand Details