Reference Guide
The following command is an optimized and filtered version:
racadm storage get vdisks -o -p DeviceDescription,OperationalState
Disk.Virtual.0:RAID.Integrated.1-1
DeviceDescription = Virtual Disk 0 on Integrated raid Controller 1
OperationalState = Not applicable
• To generate and view information about the inventory of virtual disks, run the following command:
racadm storage get vdisks -o
Disk.Virtual.2:RAID.Integrated.1-1
Status
Ok
DeviceDescription Virtual Disk 2 on Integrated RAID Controller
1
Name OS
RollupStatus Ok
State Online
OperationalState Not applicable
Layout Raid-0
Size 278.88 GB
SpanDepth 1
AvailableProtocols SAS
MediaType HDD
ReadPolicy Read Ahead
WritePolicy Write Back
StripeSize 64K
DiskCachePolicy Default
BadBlocksFound NO
Secured NO
RemainingRedundancy 0
EnhancedCache Not Applicable
T10PIStatus Disabled
BlockSizeInBytes 512
• To generate and view information about the inventory of storage enclosures connected to the connector.
This command displays all enclosure objects for the connector FQDD.
racadm storage get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status
Ok
State Ready
DeviceDescription Backplane 1 on Connector 0 of Integrated
RAID Controller 1
RollupStatus Ok
Name BP13G+EXP 0:1
BayId 1
RACADM Subcommand Details 123