Reference Guide

Synopsis

• racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l

<location> -u <user name> -p <password>] [--vFlash]

• racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--

nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]

• To create an AutoBackup Schedule.

racadm systemconfig backup [-f <filename>] <target> [-n <passphrase>][-l

<location> -u <user name> -p <password>] [--vFlash] -time <time> [-dom

<DayOfMonth>] [-wom <WeekOfMonth>] [-dow <DayofWeek>] -rp <repeat> -mb

• To view an AutoBackup Schedule.

racadm systemconfig getbackupscheduler

• To delete an AutoBackup Schedule.

racadm systemconfig clearbackupscheduler

NOTE: After the parameters are cleared, the AutoBackupScheduler is disabled. To schedule the

backup again, enable the AutoBackupScheduler.

This command does not support proxy parameters. To perform the operation with http and https, the proxy

parameters has to be configured in the lifecyclecontroller.lcattributes. Once these proxy parameters are configured,

they become the part of default configuration. They have to be removed to ignore the proxy parameters.

The valid proxy parameters :

• UserProxyUserName

• UserProxyPassword

• UserProxyServer

• UserProxyPort

• UserProxyType

136

RACADM Subcommand Details