Reference Guide

Synopsis
• To perform the technical support report operation by specifying the type of operation.
racadm techsupreport <tech support report command type>
• To collect the report data.
racadm techsupreport collect [-t <type of logs>]
• To export the collected report data.
racadm techsupreport export -l <CIFS, NFS, HTTP, HTTPSshare> -u <username> -
p <password>
• To get the timestamp of the last operating system application data collection.
racadm techsupreport getupdatetime
• To update the operating system application data collection.
racadm techsupreport updateosapp -t <type of OS App logs>
• To export the collected report data to local share.
racadm techsupreport export -f <filename>
Input
• -t — type of logs. You can specify any of the following values separated by a ‘,’ (comma)
• SysInfo — System Information
• OSAppNoPII — Filtered OS and Application data
• OSAppAll — OS and Application data
•
TTYLog — TTYLog data
NOTE:
• For updating the operating system application data collection, enter the value OSAppNoPII or
OSAppAll to the -t option.
• If no value is specified then system information data is collected.
• To perform the OSLog collection, make sure that ISM is installed and running.
• TTYLog includes PCIeSSD data.
• -l — network share location to export the report
• -u — user name for the remote share to export the report
• -p — password for the remote share to export the report
• -f— target filename for the exported log.
RACADM Subcommand Details 141