Reference Guide

cfgRhostsSyslogPort (Read or Write)
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
Legal Values
10–65535
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer2 (Read or Write)
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog servers. This property is only
valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgUserAdmin
This group provides configuration information about the users allowed to access iDRAC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
Use this object with the config or getconfig subcommands. To use the command as follows: -i <index group>, supply an index
group number
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description
The unique index of a user.
Legal Values
This parameter is populated based on the existing instances.
Default
<index of the instance>
iDRAC Property Database Group and Object Descriptions 159