Reference Guide

Legal Values
A string of up to 255 characters.
Default
<blank>
cfgRacVirtual
This group contains parameters to configure the iDRAC Virtual Media feature. One instance of the group is allowed.
The following sections provide information about the objects in the cfgRacVirtual.
cfgVirMediaAttached (Read or Write)
Description
This object is used to attach virtual devices to the system via the USB bus. When the devices are attached, the
server recognizes valid USB mass storage devices attached to the system. Which is equivalent to attaching a local
USB CDROM/floppy drive to a USB port on the system. When the devices are attached, they can be connected
to the virtual devices remotely using iDRAC web interface or the CLI. Setting this object to 0 causes the devices to
detach from the USB bus.
NOTE: Modifying this property does not impact the remote file sharing operation.
Legal Values
• 0 = Detach
• 1 = Attach
• 2 = AutoAttach
Default
0
cfgVirtualBootOnce (Read or Write)
Description
Enables or disables the Virtual Media Boot Once feature of iDRAC.
If this property is enabled when the host server is rebooted, this feature attempts to start from the virtual media
devices — if the appropriate media is installed in the device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher during enumeration. When set to 1, the Virtual Floppy
drive is seen as a floppy drive by Windows operating systems. Windows operating systems assigns a drive letter of
A: or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change to take
effect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
iDRAC Property Database Group and Object Descriptions 173