Reference Guide

Default
1
cfgIpmiSolBaudRate (Read or Write)
Description
Specifies baud rate for serial communication over LAN.
Legal Values
9600, 19200, 57600, 115200
Default
115200
cfgIpmiSolMinPrivilege (Read or Write)
Description
Specifies the minimum privilege level required for SOL access.
Legal Values
• 2(User)
• 3(Operator)
• 4(Administrator)
Default
4
cfgIpmiSolAccumulateInterval (Read or Write)
Description
Specifies the typical amount of time that iDRAC waits before transmitting a partial SOL character data packet. This
value is 1-based 5ms increments.
Legal Values
1–255
Default
10
cfgIpmiSolSendThreshold (Read or Write)
Description
To buffer before sending an SOL data packet, specify the SOL threshold limit value and the maximum number of
bytes.
Legal Values
1–255
Default
255
cfgIpmiLan
This group is used to configure the IPMI over LAN capabilities of the system.
The following sections provide information about the objects in the cfgIpmiLan group.
cfgIpmiLanEnable (Read or Write)
Description
Enables or disables the IPMI over LAN interface.
Legal Values
• 1(TRUE)
• 0(FALSE)
184 iDRAC Property Database Group and Object Descriptions