Reference Guide

iDRAC.Security.CsrOrganizationUnit (Read or Write)
Description
Specifies the CSR Organization Unit (OU).
Legal Values
String of up to 254 ASCII characters
Default Value Not Applicable
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Security.CsrStateName (Read or Write)
Description
Specifies the CSR State Name (S).
Legal Values
String of up to 254 ASCII characters
Default Value Not Applicable
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Security.FIPSMode (Read or Write)
Description
Enables or disables the FIPS mode compliance. Enabling FIPS mode resets iDRAC configuration to factory defaults
Legal Values
• 1 - Enabled
• 0 - Disabled
Default Value 0 - Disabled
Write Privilege Configure iDRAC
License Required iDRAC Express or iDRAC Enterprise
Dependency None
NOTE: Setting FIPSMode to 0 - Disabled, will not have any effect.
NOTE: To disable FIPSmode, reset the iDRAC to factory default setting (racadm racresetcfg).
NOTE: If FIPS is enabled, you cannot perform any actions associated with the vFlash SD card, such as configuring the
vFlash SD card, exporting or backing up server profile to the vFlash, or importing server profile using vFlash.
iDRAC.Serial
The objects in this group provide configuration parameters for the serial interface of iDRAC.
NOTE:
This is supported only for rack and tower systems.
304 Database Objects With Get and Set Commands