Reference Guide
closessn
clrraclog
.
.
.
.
.
.
.
vflashsd
vflashpartition
vmdisconnect
cd
quit
• Example 2: racadm> get <press tab>
get
getconfig
getled
getniccfg
getraclog
getractime
getsel
getsensorinfo
getssninfo
getsvctag
getsysinfo
gettracelog
getversion
• Example 3:
racadm> getl<press tab>
racadm> getled <press enter> or <racadm getled>
LEDState: Not-Blinking
• Example 4:
racadm>> get bios.uefiBootSettings
BIOS.UefiBootSettings
BIOS.UefiBootSettings.UefiBootSeq
BIOS.UefiBootSettings.UefiPxeIpVersion
NOTE:
In the RACADM autocomplete mode, certain RACADM commands may not be listed inline with the platforms. In
such scenarios, execute the RACADM command in the normal execution mode.
NOTE: In the RACADM autocomplete mode, type the commands directly without giving racadm as prefix.
Lifecycle Controller Log
Lifecycle Controller logs provide the history of changes related to components installed on a managed system. You can also add work
notes to each log entry.
The following events and activities are logged:
• System events
• Storage devices
• Network devices
• Configuration
• Audit
• Updates
You can view and filter logs based on the category and severity level. You can also export and add a work note to a log event.
If you initiate configuration jobs using RACADM CLI or iDRAC web interface, the Lifecycle log captures the information about the user,
interface used, and the IP address of the system from which you initiate the job.
Introduction
35