Reference Guide

Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.SysSecurity.PwrButton (Read or Write)
Description
Enables or disables the power button on the front panel.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.SysSecurity.SecureBoot (Read or Write)
Description
Enables or disables the SecureBoot option.
NOTE: BiosBootSettings.Bootmode must be set to UEFI and MiscSettings.ForceInt10 must
be Disabled to operate this property.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SetupPassword (Read or Write)
Description
Set up the system password. Optional parameter –o <string> is used with this object to provide old password
as an authentication for changing the previously configured password to the new password.
The password can include the following:
• Up to 32 characters including whitespace.
• Contain numbers 0 through 9.
• Only lower case alphabets are accepted.
• Special characters accepted are +, ",,, — , ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be installed.
To clear the already configured password, use the option available under F2 (system setup) during system start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
Database Objects With Get and Set Commands 403